Product Description:
The TrueHeat200 (200w/m2) is a very thin underfloor heating mat kit, designed for installation on concrete floors under floor tiles. *Please check that your floor finish is suitable for underfloor heating before purchasing.
The underfloor heating mat is 0.5m wide and can be shaped to fit any free floor area that is at least 10-15% larger than the side of the mat.
The TrueHeat Underfloor Heating Mats consist of a self-adhesive fibreglass mesh with a very thin heating cable fixed to the mesh.
Available in a wide range of sizes, the TrueHeat Underfloor Heating Mats can be combined to cover any sized floor area imaginable.
PLEASE NOTE: All mat kits 13m2 and larger will consist of 2 heating mats. (Please note the 11m2 kit contains 2 heating mats).
TrueHeat200 200W/m2 underfloor heating mat kits contain the following:
- 200W/m2 self Adhesive Underfloor Heating Mat(s) with 1 cold tail
- Flexible conduit for floor sensor
- Thermostat c/w floor sensor (if selected)
- Comprehensive Instruction Manual
Thermostat Control
Up to 18m2 of TrueHeat200 heating mats can be controlled by a single underfloor heating thermostat.
For larger areas, please use multiple thermostats or a contactor to switch the load.
For warm floor applications, use a thermostat with a floor sensor only. For total heating a thermostat should be used with air and floor sensor, the exception to this would be wet areas, such as a bathroom, where the thermostat must be mounted outside the wet area with the floor sensor in the wet area floor.
Applications
TrueHeat200s can be used in any room with a concrete base floor, the only stipulation is that the TrueHeat underfloor heating mat is covered by a flexible tile adhesive and/or self-leveling compound.
Guarantee
Every TrueHeat underfloor heating mat is supplied with a lifetime manufacturers guarantee*
*Thermostat Guarantee – 2 Years