Ezheat Wetroom shower areas with exceptional strength, being able to withstand up to 100 stone. Featuring a lifetime guarantee, Ezheat wetroom shower trays are ideal for wheelchairs and are also 24mm thick to facilitate installation with existing floors.
- A level access wetroom shower area concealed beneath the vinyl or tiled flooring once installed.
- No additional support needed around the waste assisting ease & speed of installation.*
- 40mm flat area around the floor former perimeter for door placement & water retention.
*Tested in accordance with a standard floor with 16” joist centres of 47mm width & supported around the floor former outer edges. No additional support around the waste area.
Installer Friendly:
- No raised collar around the underside of the waste making installation on timber floors easier.
- Circular ribbed underside designed for setting into a concrete or screed base and eliminates slippage when installing.
- Textured top surface allows excellent adhesion of vinyl flooring.
- Offset waste positions to avoid joists.
- Pre-formed semi-drilled fixing points for secure installation.
- Can be cut to size in virtually any position using a circular saw or jigsaw.
- Suitable for timber & screeded floors.
Technical Summary:
- Manufactured using the SMC process from a combination of resin and fibreglass to form a strong and consistent floor former.
- Tested to withstand 100 Stone / 635Kg across the entire surface area to simulate a standing person.
- Excellent falls of approximately 2% - 2.5% built into the top surface.
Shower Drain:
- 2 part, 50mm water seal trapped waste for use with a floor former.
- Bolts together for easy installation.
- Removable inner cup for cleaning.
- Flow rate in excess of 26 litres per minute.
- 1½” outlet.
- 100mm deep.
- Tested in accordance with EN274-2:2002
- Manufactured in white ABS, will withstand wheelchair loadings.