The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Isolbau Waterproofing / Tanking Membane - 4Kg

SKU:
ISOTANK4
£29.99
(Inc. Tax)
£24.99
(Ex. Tax)
(No reviews yet) Write a Review

Isolbau liquid foil 4 kg

High-quality one-component sealing film/polymer membrane Sealing against moisture inside under tiles, slabs, ceramic coverings, etc. To protect moisture-sensitive substrates.

Characteristics:

  • Highly flexible
  • Solvent-free, does not pollute the environment and can be processed without any health risks.
  • Waterproof and crack-bridging
  • Protects moisture-sensitive substrates
  • Resistant to chemicals (sulfates, chlorides, acids)
  • For indoor and outdoor use
  • For walls and floors
  • For ceramic documents
  • For wet rooms such as bathroom, shower, laundry room, cellar, kitchen etc.
  • For balconies and terraces
  • Suitable for use with underfloor heating
  • Improves the adhesion of tile adhesives

Compared to competing products, you get the highest possible quality here. Isolbau liquid film has an extremely good yield (0.4 kg / m2 per layer). In contrast, other liquid films of inferior quality have only a very low yield (0.6 kg to 1.2 kg / m2 per layer)

Applications:

Suitable for a wide variety of substrates such as FERMACELL, cement and lime cement plaster, plasterboard, walls made of concrete, bricks, gypsum blocks and aerated concrete with a thin wall joint, FERMACELL Power panel H2O, appropriately mature concrete, cement, anhydrite floors, masonry, concrete , Stone, screed, wood-based panels, etc.

Processing:

The substrate must be stable, free from dust, loose parts and adhesives. New plaster and concrete must be bound and matured. Remove old, weakly adhering and peeling layers. Repair defects and unevenness in the substrate with special mortar. Reinforce porous, absorbent and weak substrates with a deep primer preparation. Cover expansion and construction joints, floor and wall connections with insulation tapes embedded in the foil. Drains and pipe penetrations embedded in the floor should be provided with sealing collars embedded in the compound. Stir well before use and use a roller or brush. Each layer needs to dry before the next is applied. The surface should be completely covered.

Technical specifications:

  • Thickness of a single layer 0.5-0.8 mm
  • Drying time of one layer 3-6 hours (3 hours at +20 degrees Celsius)
  • Remainder of the dry mass approx. 60% 76%
  • Consumption 0.4 0.8 kg / m2 / layer, depending on the nature of the surface.
  • Number of layers recommended 2
  • Surface and air temperature 0 35 * C
  • Tools quast, brush, roller, paint brush
  • Storage and transport Dry, cool rooms, temp. Above 0 * C
  • Shelf life (from date of manufacture) up to 12 months
  • Tool cleaning water
  • Water tightness at least 0.3 MPa
  • stretching over 300%
  • Maximum stress approx. 1.0 MPa

Storage:

Store in dry and cool rooms, in undamaged and tightly closed original packaging at a temperature above 0 * C. Shelf life up to 12 months after the date of manufacture. Keep protected from frost.

Features:
Tanking Membrane
MPN:
Does Not Apply
EAN:
Does not apply